3DM560 series Three-phase stepper motor drives manufacturer from China Shenzhen Zonhone Huarui Technology Co.,Ltd

3DM560 series Three-phase stepper motor drives

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

High Cost-effective, Ultra Low Noise
Motor and drive heating is low
Supply voltage can achieve 50VDC
Output current peak can achieve

Product Feature
1 High Cost-effective, Ultra Low Noise
2 Motor and drive heating is low
3 Supply voltage can achieve 50VDC
4 Output current peak can achieve 8.3A(average 5.8A)
5 Input signal TTL compatible, current automatically reduce to half in stationary
6 Three-phase stepper motor which has 3 or 6 wire can be driven
7 Optical isolation differential signal input
8 Impulse frequency response can achieve 400KHz
9 Up to 8 kinds of subdivide

Product Overview
3MD560 is a latest high subdivision three-phase stepper motor drive, suitable for drive 57-86 seat NO of various brands three-phase stepper motor. Drive use advanced sine current control
Technology, so it obviously improved the noise and riding stability of motor. Compared with most other subdivision drive products on the market, the calorific value of 3MD560 drive and motor reduce more than 15%-30%. Drive and three-phase stepper motor can improve position control accuracy, so particularly suitable for low noise, low heating motor, occasions with high stability and high requirements.

Main Application Fields
Suitable for all kinds of small and medium-sized automation equipment and instruments, such as engraving machine, marking machine, cutting machine, laser typesetting, plotter, numerically controlled machine tools, automatic assembly equipment, etc. The application effect is very good for little noise and high speed equipment.

Electrical Specification

Introductions	Unit	Minimum	Typical Value	Maximum
Output Current	A	2.1	-	8.3
Input Power Voltage	VDC	18	36	50
Control Signal Input Current	mA	7	-	16
Stepper Pulse Frequency	KHz	0	-	400
Pulse Low Level Time	μs	1.2
Insulation Resistance	MΩ	500

Working Current Setting

Output Effective Value Current	SW1	SW2	SW3
1.35A	off	off	off
1.86A	on	off	off
2.60A	off	on	off
3.20A	on	on	off
3.80A	off	off	on
4.45A	on	off	on
5.20A	off	on	on
5.80A	on	on	on

Micro-step Subdivide Setting

steps/rev	SW5	SW6	SW7	SW8
200	off	off	off	off
400	on	off	off	off
500	off	on	off	off
800	on	on	off	off
1000	off	off	on	off
1250	on	off	on	off
1600	off	on	on	off
2000	on	on	on	off
2500	off	off	off	on
3200	on	off	off	on
4000	off	on	off	on
5000	on	on	off	on
6400	off	off	on	on
8000	on	off	on	on
10000	off	on	on	on
12800	on	on	on	on

Control Signal interface Description

Name	Function
PUL+(+5V)	Pulse control signal: pulse rising edge valid; PUL- high level 4-5V, low level 0-0.5V. In order to reliably respond pulse signal, pulse width should be more than 1.2μs. Using +12V or +24V, it needs to cascade resistance.
PUL-(PUL)
DIR+(+5V)	Direction Signal: high/low level signal, in order to ensure motor to reliable reversing, direction signal should be built before pulse signal at least 5μs. The initial direction of motor be concerned with motor's wires, exchanging any two of three-phase winding U,V,W can change initial running direction of motor, DIR- high level 4-5V, low level 0-0.5V.
DIR-(DIR)
ENA+(+5V)	Enable signal: The input signal is used as enable or forbid. ENA+ connect 5V, ENA- connect low level(or internal light coupling conduction),drive will cut off any phase current of the motor, which no respond stepper pulse. If you don't need the function, keep dangling enable signal.
ENA-(ENA)

Power and motor interface description

Name	Function
GND	DC Power Ground
+V	DC power positive pole, +18V-+150V any value is OK, but recommended value is about +36VDC.
U	Three-phase motor U phase
V	Three-phase motor V phase
W	Three-phase motor W phase